首页 | 本学科首页   官方微博 | 高级检索  
     

消失模铸造与普通铸造充型过程特点的数值模拟对比分析
引用本文:俱英翠,李日,刘宏伟,马军贤,刘军利,付宏江,郑晋宝.消失模铸造与普通铸造充型过程特点的数值模拟对比分析[J].铸造,2006,55(11):1158-1161.
作者姓名:俱英翠  李日  刘宏伟  马军贤  刘军利  付宏江  郑晋宝
作者单位:1. 河北工业大学材料学院,天津市,300130
2. 河北省迁安市海钺耐磨金属材料厂,河北,迁安,064409
摘    要:利用数值模拟技术,分析对比了四种铸件消失模铸造和普通空腔铸造充型过程的差异,以及流动进程中的温度场分布的差别。结果表明,消失模充型顺序与普通空腔铸造充型顺序大为不同,消失模流动过程的热量损失较普通空腔铸造热量损失大得多。同时发现,在消失模铸件表面容易因残余泡沫而造成表面渣气孔,实际铸件的表面质量也证明了这一点。针对消失模的这些特点提供了改进工艺的实例。

关 键 词:数值模拟  消失模  铸造  充型过程
文章编号:1001-4977(2006)11-1158-04
收稿时间:2006-01-24
修稿时间:2006-04-07

The Analysis and Comparison of The Filling Process of EPC and Simple Cavity Foundry
JU Ying-cui,LI Ri,LIU Hong-wei,MA Jun-xian,LIU Jun-li,FU Hong-jiang,ZHENG Jin-bao.The Analysis and Comparison of The Filling Process of EPC and Simple Cavity Foundry[J].Foundry,2006,55(11):1158-1161.
Authors:JU Ying-cui  LI Ri  LIU Hong-wei  MA Jun-xian  LIU Jun-li  FU Hong-jiang  ZHENG Jin-bao
Abstract:By numerical simulation, the difference of filling process coupled with temperature field of EPC and the common casting technology for 4 kinds of castings was analyzed and compared, the simulation result showed that in EPC mold, the liquid filling order has great difference from that of in common mold. In the meantime, the heat lost through the filling way in EPC was also greater than that in common mold. In addition, imperfections like drag and gas holes were easy to turn out in the surface of EPC casting for imperfect technology design, and this was verified by the actual castings. And an example of improved process was provided for the features of EPC.
Keywords:numerical simulation  EPC  foundry  filling process  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号