| Abstract: | The corrosion properties of Plasma-Hot-Wire-Surfacing Part one: resistance of Nickel-base-alloy claddings against pitting and intergranular attack This paper describes measurements at claddings of nickel-based-alloys C 276, C 4 and C 22 on the St 52-3 steel substrat produced by Plasma-Hot-Wire-Surfacing (PHS). The correct heat control during the welding process is a crucial factor for the preparation of nearly precipitate-free claddings. For this reason it was necessary to optimize all the process data. The claddings itself as well as the rolled reference material (both of nearly the same chemical composition) were examined by means of metallografical and microanalytical techniques. Corrosion measurements show, that the composite materials exhibit high resistance both against pitting and intergranular corrosion and comparable to the properties of the rolled reference material. This was shown by determination of the critical pitting temperature in quinary salt solution, by electrochemical techniques in acidic chloride solution and by investigation in iron-(III)-sulfate-sulphuric acid solution. |
