| SolidWorks二次开发在机械学科毕业设计中的应用 |
| |
| 引用本文： | 王忠雷,;程钢,;袁文生,;王晓丽.SolidWorks二次开发在机械学科毕业设计中的应用[J].山东建筑大学学报,2014(6):601-604. |
| |
| 作者姓名： | 王忠雷 ;程钢 ;袁文生 ;王晓丽 |
| |
| 作者单位： | [1]山东建筑大学机电工程学院,山东济南250101; [2]山东省高校机械工程创新技术重点实验室,山东济南250101; [3]齐鲁工业大学机械与汽车工程学院,山东济南250353 |
| |
| 基金项目： | 山东建筑大学博士基金项目（XNBX1245） |
| |
| 摘 要： | 目前在本科教学中对三维CAD软件的课堂教学和实践训练,一般都集中在应用软件进行造型、装配和加工代码生成。随着CAD软件技术应用的深入,通用的CAD软件难以满足所有行业的要求,CAD软件进行二次开发,已经成为CAD软件深入应用的有效途径。文章分析机械学科毕业设计的现状及问题,阐述了CAD二次开发的技术基础,提出了二次开发技术在毕业设计中的应用途径。并对CAD软件二次开发技术在机械学科毕业设计中的应用实例进行分析,通过教学实践证明了这一创新实践教学的可行性和效果。
|
| 关 键 词： | Solidworks 二次开发 毕业设计 |
Application of secondary development of Solid Works in mechanical engineering graduation project |
| |
| Affiliation: | Wang Zhonglei, Cheng Gang , Yuan Wensheng , et al. (1. School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China; 2. Key Laboratory of Mechanical Engineering ＆ Innovation Technology in Universities of Shandong, Jinan 250101, China) |
| |
| Abstract: | The undergraduate teaching about the three-dimensional CAD software was focused on learning and training modeling,assembly and generation of processing code. With the deepening of CAD application,CAD software is difficult to meet the requirementsof all industries. A secondary development of the CAD software according to enterprise＇s characteristics and requirement, has become the effective way for the application of CAD software. In this paper,the current situation and problems of mechanical subject of graduation design was analyzed,a secondary development of the CAD software was described and the way of application secondary development technology of CAD in graduation design was proposed. The application examples of the secondary development technology of CAD software were analyzed in mechanical engineering graduate design and the teaching practice？proves the feasibility and effect of the innovative practice teaching. |
| |
| Keywords: | SolidWorks secondary development graduation project |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
