| 精铣缸体顶面、精镗缸孔及止口数控自动线的研制 |
| |
| 引用本文： | 张树礼,杨曙光,田宜全.精铣缸体顶面、精镗缸孔及止口数控自动线的研制[J].组合机床与自动化加工技术,2007(5):79-81. |
| |
| 作者姓名： | 张树礼 杨曙光 田宜全 |
| |
| 作者单位： | 大连机床集团有限责任公司,技术中心,辽宁,大连,116022 |
| |
| 摘 要： | 文章阐述了用数控自动线精铣缸体顶面、精镗缸孔及止口的设计依据和工艺方案，并对自动线的布局及采用的浮动式精密镗削头、滑台式精密铣削头、数控三导轨机械滑台、自动补偿镗杆、数控系统等关键部件的结构、原理及功能做了详细的介绍。该自动线的研制，解决了单机加工效率低、国内用户只能依赖进口设备的关键技术问题。
|
| 关 键 词： | 数控自动线 浮动式精密镗削头 滑台式精密铣削头 |
| 文章编号： | 1001-2265(2007)05-0079-03 |
| 修稿时间： | 2007-01-19 |
Finish Milling Head Face of Cylinder、Finish Boring Cylinder Hole and the Design of Digital Control Automatic Line |
| |
| ZHANG Shu-li,YANG Shu-guang,TIAN Yi-quan.Finish Milling Head Face of Cylinder、Finish Boring Cylinder Hole and the Design of Digital Control Automatic Line[J].Modular Machine Tool & Automatic Manufacturing Technique,2007(5):79-81. |
| |
| Authors: | ZHANG Shu-li YANG Shu-guang TIAN Yi-quan |
| |
| Affiliation: | Technical Center, Dalian Machine Tool Group, Dalian Liaoning 116021, China |
| |
| Abstract: | The paper expounds the design and technology of finishing milling the head face, finishing boring the hole and rabbet of cylinder body. Elaborately introduces the principles, structures and functions of FPB, STPM, NCMSTG, ACB, MCM and the Lay Out of the Automatic Line. The development of this automatic line solves the problems of low efficiency in single machine tool and the dependence on foreign products. |
| |
| Keywords: | NCAL(Numerical Control Automatic Line) FPB(Floating Pecise Boring) STPM(Sliding Type Precise Milling) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
