首页 | 本学科首页   官方微博 | 高级检索  
     

表面处理剂对隔热层粘接性能的研制
引用本文:王勃,黄伣丽,曹先启,陈泽明,王超. 表面处理剂对隔热层粘接性能的研制[J]. 化学与粘合, 2011, 33(3): 15-16
作者姓名:王勃  黄伣丽  曹先启  陈泽明  王超
作者单位:黑龙江省科学院,石油化学研究院,黑龙江,哈尔滨,150040
摘    要:为提高隔热层粘接强度,采用材料拉伸强度测试方法,研究了空气湿度、处理剂浓度对常温固化磷酸盐胶黏剂粘接隔热层力学性能的影响.研究表明.当处理剂浓度为5%,空气湿度为70%.处理剂处理的隔热层可以在20~1200℃达到隔热层深层破坏,而且粘接强度还得到较大提高,表明该处理剂可以显著提高隔热层的粘接强度.

关 键 词:处理剂  隔热层  粘接

The Effect of Surface Treatment Agent on the Adhesion Properties of Heat-insulating Layer
WANG Bo,HUANG Qian-li,CAO Xian-qi,CHEN Ze-ming , WANG Chao. The Effect of Surface Treatment Agent on the Adhesion Properties of Heat-insulating Layer[J]. Chemistry and Adhesion, 2011, 33(3): 15-16
Authors:WANG Bo  HUANG Qian-li  CAO Xian-qi  CHEN Ze-ming    WANG Chao
Affiliation:WANG Bo,HUANG Qian-li,CAO Xian-qi,CHEN Ze-ming and WANG Chao(Institute of Petrochemistry,Heilongjiang Academy of Sciences,Harbin 150040,China)
Abstract:In order to enhance the bonding strength of heat-insulating layer, the effect of humidity and concentration of treatment agent on the mechanical property of heat-insulating layer bonded with normal temperature curing phosphate adhesive were research with adopting material tensile strength testing method. The results indicated that when the humidity was 70% and the concentration of treatment agent was 5%, the heat-insulating layer treated by the agent could be destroyed deeply at 20-1200℃, and the bending strength was improved greatly, it was proved that this surface treatment agent could remarkably enhance the bonding strength of heat-insulating layer.
Keywords:Surface treatment agent  heat-insulating layer  bonding  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号