Wettability of Surface Oxyfluorinated Polypropylene Fibres and Its Effect on Interfacial Bonding with Cementitious Matrix

The surface of high molecular weight polypropylene monofilament fibre was modified using a oxyfluorination method. The oxyfluorination treatment level was varied and a hydrolysis post-treatment was also applied. Contact angles of oxyfluorinated, hydro-lyzed oxyfluorinated and unmodified polypropylene fibres were obtained by dynamic contact angle (DCA) measurement using three liquids of known dispersion, acid and base surface free energy components. The surface free energies were then calculated according to the acid-base theory developed by Good, van Oss and Chaudhury. Surface oxyfluorination largely increased the acid and base components of the fibres' surface free energy compared with unmodified polypropylene fibres. The oxyfluorinated and unmodified polypropylene fibre surfaces were observed by Scanning Electronic Microscopy and Photoacoustic Infrared Spectroscopy. It was found that the surface oxyfluorination largely increases the roughness of the polypropylene surfaces and the carbonyl group content increases as the treatment level increases. The interfacial shear bond strengths between the cementitious matrix and the polypropylene fibres treated under various conditions were determined by embedded fibre pull-out tests. Results showed that the fibre surface oxyfluorination treatments increase the interfacial bond strengths. The correlations between the shear bond strengths and surface free energy components were established. Results showed that fibre/concrete interfacial bonding was best correlated with the acid component of surface free energy of polypropylene fibres.