| 几种纳米铜添加剂抗磨性能试验研究 |
| |
| 引用本文： | 刘 谦,许一,史佩京,王晓丽,于鹤龙,徐滨士. 几种纳米铜添加剂抗磨性能试验研究[J]. 中国表面工程, 2006, 0(7): 137-139 |
| |
| 作者姓名： | 刘 谦 许一 史佩京 王晓丽 于鹤龙 徐滨士 |
| |
| 作者单位： | 1.装甲兵工程学院 装备再制造工程系，北京 100072； 2.装备再制造技术国防科技重点实验室，北京 100072 |
| |
| 基金项目： | 自然科学基金项目（50235030） |
| |
| 摘 要： | 采用化学反应法制备了5种纳米铜微粉，采用超声分散工艺分散于400SN基础油中进行摩擦磨损试验。试验结果表明，在试验范围内1#、2#和3#纳米铜在较高载荷下能够提高基础油的抗磨性能，磨斑直径为基础油润滑时的70%。能谱分析表明磨痕表面不均匀的分布有铜元素，说明添加剂中的纳米铜在磨痕表面沉积形成了保护性润滑膜，起到改善润滑油抗磨性能的作用。
|
| 关 键 词： | 纳米铜；添加剂；抗磨 |
Study on the Anti-wear Properties of Several Nano-Cu Additives |
| |
| LIU Qian,XU Yi,SHI Pei-jing,WANG Xiao-li,YU He-long,XU Bin-shi. Study on the Anti-wear Properties of Several Nano-Cu Additives[J]. China Surface Engineering, 2006, 0(7): 137-139 |
| |
| Authors: | LIU Qian XU Yi SHI Pei-jing WANG Xiao-li YU He-long XU Bin-shi |
| |
| Affiliation: | 1.Academy of Armored Forces Engineering, Beijing 100072; 2.National Key Laboratory for Remanufacturing, Beijing 100072 |
| |
| Abstract: | Five kinds of copper nanometer particles were synthesized with chemical reaction method and dispersed in 400SN lubricant oil by means of ultrasonic disperse process. The effect of the nano-Cu particles as an additive on the anti-wear ability of 400SN oil was examined on a four-ball machine. The results showed that the 1#, 2# and 3# nano-Cu additives could considerably increase the anti-wear ability of base oil under higher load in test. The element dispersing on the worn surfaces were studied by means of electron microprobe analysis. Cu element was observed obviously. The deposition of nano-Cu on the worn surface contributed to the improvement of the anti-wear ability. |
| |
| Keywords: | nano-Cu additives anti-wear |
|
| 点击此处可从《中国表面工程》浏览原始摘要信息 |
|
点击此处可从《中国表面工程》下载全文 |
