| 基于UG和MoldFlow的相机外壳注塑模具设计 |
| |
| 引用本文： | 宋双柱.基于UG和MoldFlow的相机外壳注塑模具设计[J].哈尔滨理工大学学报,2009,14(3):16-19. |
| |
| 作者姓名： | 宋双柱 |
| |
| 作者单位： | 哈尔滨理工大学,计算机与控制学院,黑龙江,哈尔滨,150080 |
| |
| 摘 要： | 针对传统注塑模具设计方法存在设计周期长、成本高且质量难以保证的不足,采用计算机辅助设计软件UG和有限元分析软件MoldFlow相结合的方法进行相机外壳的注塑模具设计,创建了相机外壳的三维实体模型和模流分析有限元模型,通过对注射过程中流动分析结果、冷却分析结果的仿真,调整了相机外壳注塑模具的冷却系统结构,最后采用UG/MoldWizard模块创建了经过优化和调整的注塑模具实体模型.
|
| 关 键 词： | 注塑模具 模流分析 UG MPI |
Camera Shell Injection Mold Design Based on UG and MoldFlow |
| |
| SONG Shuang-zhu.Camera Shell Injection Mold Design Based on UG and MoldFlow[J].Journal of Harbin University of Science and Technology,2009,14(3):16-19. |
| |
| Authors: | SONG Shuang-zhu |
| |
| Affiliation: | SONG Shuang-zhu (School of Computer Science and Technology, Harbin University of Science and Technology, Harbin 150080, China) |
| |
| Abstract: | Traditional mold design methods have many disadvantages, such as long design cycle, high cost and difficult guarantee of quality. The mold of the camera shell is designed by combining the computer-aided design software UG and the finite-element analysis software MoldFlow. The three-dimensional solid model of camera shell and mold flow analysis model are created, and according to the simulation of the flow analysis and cooling analysis results, the cooling system structure of the camera mold is regulated. Finally the injection mold solid model after optimization and regulation are completed by means of UG/MoldWizard module. |
| |
| Keywords: | UG MPI |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
