首页 | 本学科首页   官方微博 | 高级检索  
     

高投料量下炼铜闪速炉内熔炼过程的数值模拟
引用本文:陈卓,王云霄,宋修明,赵荣升,殷术贵.高投料量下炼铜闪速炉内熔炼过程的数值模拟[J].中国有色金属学报,2011(11).
作者姓名:陈卓  王云霄  宋修明  赵荣升  殷术贵
作者单位:中南大学能源科学与工程学院;金隆铜业有限公司;
基金项目:国家高技术研究发展计划资助项目(2010AA065200)
摘    要:以FLUENT 6.3为计算平台,建立了铜闪速炉熔炼过程数值模型,并针对高投料量下反应塔气粒两相变物理场信息分布变化特点展开仿真研究。结果表明:工艺风入炉后迅速膨胀,并在反应塔中心形成轮廓明显的主体气流柱;主体气流柱内外的温度和氧浓分布梯度变化较大;局部低温出现在精矿喷嘴下方,而高温反应核心区域则下移至反应塔中下部。综合多场耦合仿真结果可知:高投料量条件下精矿粒子与反应配风之间混合力度欠佳是造成高投料量反应塔内熔炼过程反应效率降低的主要原因。

关 键 词:铜闪速炉  反应塔  熔炼反应  数值模拟  

Numerical simulation of smelting process in copper flash smelters at high loading rate
CHEN Zhuo,WANG Yun-xiao,SONG Xiu-ming,ZHAO Rong-sheng,YIN Shu-gui.Numerical simulation of smelting process in copper flash smelters at high loading rate[J].The Chinese Journal of Nonferrous Metals,2011(11).
Authors:CHEN Zhuo  WANG Yun-xiao  SONG Xiu-ming  ZHAO Rong-sheng  YIN Shu-gui
Affiliation:CHEN Zhuo1,WANG Yun-xiao1,SONG Xiu-ming2,ZHAO Rong-sheng2,YIN Shu-gui1 (1.School of Energy Science and Engineering,Central South University,Changsha 410083,China,2.Jinlong Copper Co.,Ltd.,Tongling 244000,China)
Abstract:A numerical model was developed and the simulation was carried out with FLUENT 6.3 to investigate the distributions of multi-fields in the reaction shaft of a flash furnace at high loading rate.The results show that the process air expands quickly after it is fed into the furnace and forms a large downward gas column in the centre of the reaction shaft.Great gradients are found in the gaseous temperature and concentration destinations across the main gas column.Moreover,a low temperature region is found und...
Keywords:copper flash furnace  reaction shaft  smelting reaction  numerical simulation  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号