首页 | 本学科首页   官方微博 | 高级检索  
     

金刚石/碳化硅/铝复合材料的热膨胀性能
引用本文:薛晨,于家康,谭雯.金刚石/碳化硅/铝复合材料的热膨胀性能[J].中国有色金属学报,2011(8).
作者姓名:薛晨  于家康  谭雯
作者单位:西北工业大学凝固技术国家重点实验室;
基金项目:国家自然科学基金资助项目(60776019)
摘    要:采用气压浸渗法制备金刚石/碳化硅/铝复合材料,研究复合材料的断口形貌以及界面反应,测试复合材料的热膨胀性能。结果表明:金刚石表面Ti镀层使得其选择性粘附不同于未镀钛金刚石的,而在各个面上均粘附有Al,金刚石与基体间有着良好的界面结合,断裂方式以基体断裂为主,其界面反应后,Ti以Al3Ti和Ti-Al-Si等金属间化合物的形式析出,提高金刚石/铝界面的结合强度,降低复合材料的热膨胀系数;随着金刚石颗粒粒径的增大,金刚石和碳化硅颗粒间粒径比的增大增加了整个复合材料的体积分数,从而降低了其热膨胀系数;金刚石颗粒粒径增大导致热膨胀系数升高。这两方面共同影响复合材料的热膨胀系数,但前者起主导作用;金刚石和碳化硅在不同配比下的热膨胀系数随着复合材料中碳化硅含量的增加逐渐增大,Terner模型与Kerner模型的计算平均值能较好地预测实验结果。

关 键 词:复合材料  金刚石  碳化硅  热膨胀  

Thermal expansion behavior of diamond/SiC/Al composite
XUE Chen,YU Jia-kang,TAN Wen.Thermal expansion behavior of diamond/SiC/Al composite[J].The Chinese Journal of Nonferrous Metals,2011(8).
Authors:XUE Chen  YU Jia-kang  TAN Wen
Affiliation:XUE Chen,YU Jia-kang,TAN Wen (State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi'an 710072,China)
Abstract:The diamond/SiC/Al composites were produced by gas pressure infiltration,and the morphology of the fracture surfaces,interface reactions and coefficients of thermal expansion of the composites were investigated.The results show that the aluminum matrix adheres to all the faces of Ti-coated diamond,which is different from the selective adhesion phenomenon observed in the uncoated diamond composites,the interface bonding between diamond and aluminium matrix is strengthened due to the existence of Ti coating o...
Keywords:composites  diamond  SiC  thermal expansion  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号