Sliding friction and wear behaviour of vinylester and its composites under dry and water lubricated sliding conditions |
| |
Authors: | S.R. Chauhan Anoop Kumar I. Singh |
| |
Affiliation: | 1. Department of Mechanical Engineering, National Institute of Technology, Hamirpur (HP) 177 005, India;2. Department of Mechanical and Industrial Engineering, IIT Roorkee, India |
| |
Abstract: | In this paper, we studied and explored the tribological performance of pure vinylester (V), glass fiber reinforced (GFR), SiC filled glass fiber reinforced vinylester composite under dry and water lubricated sliding conditions. Friction and wear tests were carried out with configuration of a pin on a rotating disc under ambient conditions. Tests were conducted at normal load 10, 30 and 50 N and under sliding speed of 1.6 m/s, 2.8 m/s and 4 m/s. The results showed that the coefficient of friction decreases with the increase in applied normal load values both under dry and water lubricated conditions. On the other hand for pure vinylester specific wear rate increases with increase in applied normal load under dry sliding condition and decreases with increase in applied normal load under water lubricated conditions. However the specific wear rate for GFR vinylester composite and SiC filled GFR vinylester composite decreases with the increase in applied normal load both under dry and water lubricated conditions. Moreover, for the range of load and speeds used in this investigation the coefficient of friction and specific wear rates using water lubricant registered lower values than that of the dry condition. The specific wear rates for pure vinylester and vinylester + 50 wt.% GFR and SiC filled GFR vinylester composite under dry and water lubricated sliding condition were in the order of 10−7 mm3 N−1 mm−1. |
| |
Keywords: | Specific wear rate Scanning electron microscopy Vinylester composites |
本文献已被 ScienceDirect 等数据库收录! |
|