Investigation of mechanical properties of boro-tempered ductile iron

In this study, the effects of boro-tempering heat treatment on mechanical properties of ductile iron were investigated. Standard tensile test samples and unnotched Charpy specimens were boronized at 900 °C for 1, 3 and 5 h and then tempered at four different temperatures (250, 300, 350 and 450 °C) for 1 h. Micro-hardness measurements were performed on cross-section of the metallographically prepared samples, where cut from fractured impact test samples. The hardness of boride layers was measured in the range of 1654–1867 HV_0.05. It was observed that tempering temperature was more effective on the mechanical properties of the material than boronizing time. Optimum mechanical properties were obtained for the samples boronized for 1–3 h and then tempered between 250 and 350 °C for 1 h.