首页 | 本学科首页   官方微博 | 高级检索  
     

长玻璃纤维增强聚丙烯复合材料的韧性
引用本文:庄辉,刘学习,程勇锋,戴干策.长玻璃纤维增强聚丙烯复合材料的韧性[J].合成树脂及塑料,2006,23(6):53-55.
作者姓名:庄辉  刘学习  程勇锋  戴干策
作者单位:华东理工大学化学工程联合国家重点实验室,上海,200237
摘    要:以玻璃纤维和聚丙烯为原料,制备了长玻璃纤维增强聚丙烯(LFT-PP)复合材料,研究了基体韧性、纤维长度和界面相容剂对LFT-PP韧性的影响。结果表明LFT-PP韧性随基体韧性增加而增加;当玻璃纤维长度从2.06mm增加到4.66mm时,LFT-PP的悬臂梁缺口冲击强度从134.4J/m提高到238.0J/m,增加了约80%;添加界面改性剂降低了LFT-PP悬臂梁缺口冲击强度,从311.4J/m降为181.8J/m。

关 键 词:聚丙烯  长玻璃纤维  增强  韧性  复合材料
文章编号:1002-1396(2006)06-0053-03
收稿时间:2006-06-15
修稿时间:2006-08-05

Toughness of long glass fiber reinforced polypropylene composites
Zhuang Hui,Liu Xuexi,Cheng Yongfeng,Dai Gance.Toughness of long glass fiber reinforced polypropylene composites[J].China Synthetic Resin and Plastics,2006,23(6):53-55.
Authors:Zhuang Hui  Liu Xuexi  Cheng Yongfeng  Dai Gance
Affiliation:State Key Laboratory Chemical Engineering, East China University of Science and Technology, Shanghai, 200237
Abstract:Long glass fiber reinforced polypropylene (LFT-PP) was prepared with glass fiber and PP as raw materials. The effects of matrix toughness, fiber length and interface compatibilizer on toughness of LFT-PP were studied. The results indicate that the toughness of LFT-PP rises as the matrix toughness increases. In the case of increasing fiber length from 2.06 mm to 4.66 mm, the impact strength of LFT-PP jumps from 134.4 J/m to 238.0 J/m, viz. an increment of about 80%. The toughness is impaired due to the addition of interfacial modifier, reducing to 181.8 J/m from 311.4 J/m.
Keywords:polypropylene  long glass fiber  reinforcement  toughness  composite material
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号