| 莲纤维的纺纱工艺探究 |
| |
| 引用本文： | 靳贺玲,秦姝.莲纤维的纺纱工艺探究[J].化纤与纺织技术,2012,41(3):19-22. |
| |
| 作者姓名： | 靳贺玲 秦姝 |
| |
| 作者单位： | 南通职业大学纺织服装学院,江苏南通,226007 |
| |
| 摘 要： | 分析了莲纤维的可纺性,研究了莲纤维的纺纱工艺。结果表明:莲纤维纺纱性能介于棉纤维和麻纤维之间,宜采用莲/棉进行混纺;试纺纱线品种为莲/棉20/80,细度28 tex混纺纱;选择的工艺参数为;采用较低的速度:FA022打手速度260 r/min、FA141综合打手速度903 r/min、锡林360 r/min、刺辊880 r/min;采用较大粗纱捻系数,捻度45 T/m;采用较大钢丝圈,钢丝圈号数选择5/0;最后纺制的纱线质量能满足后续生产要求。
|
| 关 键 词： | 莲纤维 物理性能 可纺性 纺纱 |
SPINNING TECHNOLOGY OF LOTUS FIBER |
| |
| JIN He-ling
,
QIN Shu.SPINNING TECHNOLOGY OF LOTUS FIBER[J].Chemical Fiber & Textile Technology,2012,41(3):19-22. |
| |
| Authors: | JIN He-ling QIN Shu |
| |
| Affiliation: | (Department of Textile Engineering, Nantong Vocational College, Nantong 226007, China) |
| |
| Abstract: | This paper analyzed the spinnability of lotus fiber and studied the spinning technology of lotus fiber. The results show that the lotus fiber＇ s spinning performance is between cotton fiber and ramie fiber, and it should be blended with cotton; the trial product is lotus/cotton blending of 20/80 with yarn fineness 28 tex. The appropriate process parameters are as follows： the lower speed： beater of FA022 in 260 r/rain, beater of FA141 in 903 r/min, cylinder in 360 r/min and licker in 880 r/min; the bigger roving twist factor： twist is 45 T/m; the larger steel ring： number of steel wire ring is 5/0. The spun yarn quality can meet the subsequent production requirements. |
| |
| Keywords: | lotus fiber physical property spinnability spinning |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
