首页 | 本学科首页   官方微博 | 高级检索  
     

华龙一号包络功率形状验证方法研究
引用本文:刘同先,李天涯,肖鹏,廖鸿宽,于颖锐,周金满. 华龙一号包络功率形状验证方法研究[J]. 原子能科学技术, 2021, 55(1): 128-134. DOI: 10.7538/yzk.2020.youxian.0086
作者姓名:刘同先  李天涯  肖鹏  廖鸿宽  于颖锐  周金满
作者单位:中国核动力研究设计院 核反应堆系统设计技术重点实验室,四川 成都610041
摘    要:堆芯功率分布可用径向功率分布和轴向功率分布分别描述,功率分布对堆芯偏离泡核沸腾(DNB)具有较高的重要性。核电厂在运行过程及事故过程中可能出现的功率分布各不相同,为有效简化热工水力设计及事故分析所需的功率形状,根据事故过程中功率分布的变化程度以及核电厂保护系统特性,将事故分析所需的极限功率形状分类包络。根据华龙一号的保护系统设置,以堆芯功率能力分析方法为基础,介绍了华龙一号工况Ⅰ包络功率形状和参考功率形状的验证方法。计算结果表明,工况Ⅰ包络功率形状和参考功率形状分别为各自适用场景下的包络功率形状。结果不仅有助于工程设计人员快速理解包络功率形状的验证方法,也有利于包络功率形状在后续事故分析中合理使用。

关 键 词:包络功率形状   堆芯功率能力   验证方法

Investigation in Verification of Limiting Power Shape in HPR1000
LIU Tongxian,LI Tianya,XIAO Peng,LIAO Hongkuan,YU Yingrui,ZHOU Jinman. Investigation in Verification of Limiting Power Shape in HPR1000[J]. Atomic Energy Science and Technology, 2021, 55(1): 128-134. DOI: 10.7538/yzk.2020.youxian.0086
Authors:LIU Tongxian  LI Tianya  XIAO Peng  LIAO Hongkuan  YU Yingrui  ZHOU Jinman
Affiliation:Science and Technology on Reactor Design Technology Laboratory, Nuclear Power Institute of China, Chengdu 610041, China
Abstract:The core power distribution which is composed of radial power distribution and axial power distribution is of greater importance for departure from nucleate boiling (DNB) analysis. The power shapes differ from one another during normal operation and accident condition. In order to simplify analysis of each accident condition, the limiting power shape is used to bound the core power distribution according to the change of core power distribution due to accident condition and the characteristics of protection system of nuclear power plant. Based on the protection system of HPR1000 and core power capability analysis methodology, the investigation in verification of limiting power shape in HPR1000 was introduced. The results show that the design power shape bounds the core power distributions in category I and the reference power shape bounds the core power distributions in accident conditions protected by the over temperature ΔT protection system. The results not only assist engineers to understand the verification method of limiting power shape, but also are helpful for properly use of limiting power shape in accident analysis.
Keywords:limiting power shape  core power capability  verification method  
点击此处可从《原子能科学技术》浏览原始摘要信息
点击此处可从《原子能科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号