首页 | 本学科首页   官方微博 | 高级检索  
     

碳纳米管/TiO2电极光电催化测定耐兰方法探讨
引用本文:李达钱,陈金媛.碳纳米管/TiO2电极光电催化测定耐兰方法探讨[J].浙江工业大学学报,2006,34(4):369-372.
作者姓名:李达钱  陈金媛
作者单位:1. 浙江天台县环境检测站,浙江,天台,317200
2. 浙江工业大学,生物与环境工程学院,浙江,杭州,310032
摘    要:自合成二氧化钛-碳纳米管(TiO2一CNT)复合催化剂,用Nafion溶液把CNT—TiO2固定到玻碳电极上制成CNT—TiO2/GC修饰电极,以耐兰染料为测定对象,进行光电化学响应研究.结果表明,在pH7.2的磷酸盐缓冲液中,示差脉冲伏安法(DPV)测定,分散兰1于-0.4V(vs Ag/AgCl)处产生良好的阴极还原峰,电极对耐兰染料的吸附过程符合Langmuir吸附,其光电响应值高于碳糊/TiO2电极.高光电响应意味着复合材料制成电极后,对有机染料废水的检测限更低,灵敏度更高。

关 键 词:碳纳米管  修饰电极  耐兰
文章编号:1006-4303(2006)04-0369-04
收稿时间:2005-09-19
修稿时间:2005-09-19

The study of photoelectrocatalytic measurement method of Nile blue(NB) on carbon nano-tube/titanium dioxide/glassy carbon electrode
LI Da-qian,CHEN Jin-yuan.The study of photoelectrocatalytic measurement method of Nile blue(NB) on carbon nano-tube/titanium dioxide/glassy carbon electrode[J].Journal of Zhejiang University of Technology,2006,34(4):369-372.
Authors:LI Da-qian  CHEN Jin-yuan
Abstract:The carbon nano-tube/ titanium dioxide/glassy carbon(CNT/TiO_2/GC) electrode was prepared using Nafion solution to immobilize CNTTiO_2 on glassy carbon electrode.The analysis method for the photo-electrochemical catalysis of nile blue was investigated.The experimental results showed that the sensor displayed an excellent electrocatalytical response to the Nile blue in a phosphate buffer medium(pH 7.2),which was measured by using Differential Pulse Voltammetry.A sensitive reductive potential peak of Nile blue was observed at-0.4V(vs Ag/AgCl) on the CNT/TiO_2/GC electrode.A Langmuir type of adsorption of Nile blue on the electrode was found.The photo-electrochemical response of the TiO_2-CNT/GC electrode was stronger than that of the TiO_2/carbon paste electrode.That meant the TiO_2-CNT/GC electrode had higher sensitivity to and lower detection limit of dyes in wastewater.
Keywords:CNT-TiO2
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号