| Abstract: | Precision of microwave precipitation remote sensing is ensured by studying different hydrometeor classes (raindrops, snowflakes, graupel, and so on), shapes, and drop size distribution (DSD). Recently, DSD estimates and hydrometeor classification algorithms using polarimetric radars were proposed. These algorithm developments require a validation tool providing in situ hydrometeor measurement. We are working toward the development of a low‐cost, light‐weight, and disposable ballooning hydrometeor imaging probe with DSD measurement capabilities. This paper describes the performance of a new line‐scanning laser hydrometeor imaging probe (called PROBE) and validates the DSD using a commercially available impact‐type disdrometer. PROBE captures raindrop images with 0.125 mm horizontal resolution and more than six slices at the 33‐kHz slice rate, providing a reasonable raindrop diameter. DSD validation shows that PROBE acquires adequate DSD shapes during every 2‐min interval. These results demonstrate PROBE's performance in hydrometeor imaging and DSD measurement capabilities in a rainfall. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. |
