| 冷轧无取向硅钢50W470 铁损的各向异性 |
| |
| 引用本文： | 孙述利,张敏刚,郭东城,姚力,宋文军.冷轧无取向硅钢50W470 铁损的各向异性[J].特殊钢,2006,27(4):34-35. |
| |
| 作者姓名： | 孙述利 张敏刚 郭东城 姚力 宋文军 |
| |
| 作者单位： | 1太原科技大学材料学院，太原030024;
2太原钢铁(集团)有限公司，太原030003 |
| |
| 基金项目： | 太原科技大学青年基金项目资助（200510） |
| |
| 摘 要： | 对成分(％)为0．003C、1．46Si、0．38Al的0．5 mm冷轧无取向硅钢板进行夹杂物、组织和织构的测定与分析。分析结果表明,试样铁损各向异性为7．56％-11．01％;合理提高无取向硅钢50W470热轧时的终轧温度,有利于提高织构组分密度;同时延长冷轧板的连续退火时间,以利于位向晶粒充分长大,从而减少铁损的各向异性。
|
| 关 键 词： | 冷轧无取向硅钢 各向异性 热轧终轧温度 退火时间 |
| 收稿时间： | 03 6 2006 12:00AM |
| 修稿时间： | 2006-03-06 |
Anisotropy of Iron Loss of Non-Orientation Silicon Steel 50W470 |
| |
| Sun Shuli,Zhang Mingang,Guo Dongcheng,Yao Li,Song Wenjun.Anisotropy of Iron Loss of Non-Orientation Silicon Steel 50W470[J].Special Steel,2006,27(4):34-35. |
| |
| Authors: | Sun Shuli Zhang Mingang Guo Dongcheng Yao Li Song Wenjun |
| |
| Affiliation: | 1 Materials School,Taiyuan Science and Technology University,Taiyuan 030024;
2 TaiyuanIronandSteel(Group)CoLtd,Taiyuan030003 |
| |
| Abstract: | The inclusion, structure and texture of 0.5 mm cold rolled sheet of non-orientation silicon steel - 0.003C, 1.46Si, 0.38M have been tested and analyzed. The analyzed results showed that difference in anisotropy of iron loss of sample was 7.56%- 11.01%. Reasonably increasing finishing rolling temperature of non-orientation silicon steel 50W470 is available to increase density of texture component and prolonging continuous annealing time of cold rolling sheet is available to enough crow of directional grain, thus the anisotroov of iron loss reduces. |
| |
| Keywords: | Cold Roiled Non-Orientation Silicon Steel Anisotropy Finishing Temperature of Hot Rolling Annealing Time |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
