| 检验夹具中工件以两滚轮支承的定位误差分析 |
| |
| 引用本文： | 陈世平,李琳. 检验夹具中工件以两滚轮支承的定位误差分析[J]. 工具技术, 2007, 41(3): 61-63 |
| |
| 作者姓名： | 陈世平 李琳 |
| |
| 作者单位： | 1. 重庆工学院汽车学院,400050,重庆市
2. 重庆工学院 |
| |
| 摘 要： | 分析了检验夹具中工件以两滚轮支承时的定位误差对测量工件轴颈径向圆跳动精度的影响,提出了应根据不同的影响状况采用不同的测量方位。
|
| 关 键 词： | 滚轮 定位误差 测量精度 |
| 修稿时间： | 2006-01-01 |
Analysis of Locating Errors of Workpiece Supported by Rollers in Gauging Fixture |
| |
| Chen Shiping,Li Lin. Analysis of Locating Errors of Workpiece Supported by Rollers in Gauging Fixture[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2007, 41(3): 61-63 |
| |
| Authors: | Chen Shiping Li Lin |
| |
| Affiliation: | Chen Shiping Li Lin |
| |
| Abstract: | The paper analyzed the influence of the locating errors to measure precision when workpiece is supported by two rollers in a gauging fixture. The different measuring direction is adopted according to the influence. |
| |
| Keywords: | rollers locating errors measure precision |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
