| 环形切割器药型罩方案优化设计 |
| |
| 引用本文： | 李永胜,王伟力,田传勇.环形切割器药型罩方案优化设计[J].弹箭与制导学报,2011,31(4):118-120. |
| |
| 作者姓名： | 李永胜 王伟力 田传勇 |
| |
| 作者单位： | 1. 海军航空工程学院,山东烟台,264001
2. 重庆红宇精密工业有限责任公司,重庆,402760 |
| |
| 摘 要： | 在反舰导弹串联战斗部前级环形切割器的设计中优选药型罩材料。通过数值模拟,对铜、钨、铁三种单质药型罩,以及一定比例的两种铜钨复合药型罩的切割效果进行分析。结果表明,五种药型罩方案均能贯穿100mm靶板。铁药型罩和铜含量较少的复合药型罩在靶板底部形成射流堆积巢,钨药型罩和铜含量较多的复合药型罩贯穿后剩余速度较低,切割时间较长。最终确定以铜作为环形切割器的药型罩材料。该结论有助于新型串联战斗部的优化设计。
|
| 关 键 词： | 爆炸力学 环形射流 药型罩 切割效果 |
The Optimization Design for the Liner of Annular Cutter |
| |
| LI Yongsheng,WANG Weili,TIAN Chuanyong.The Optimization Design for the Liner of Annular Cutter[J].Journal of Projectiles Rockets Missiles and Guidance,2011,31(4):118-120. |
| |
| Authors: | LI Yongsheng WANG Weili TIAN Chuanyong |
| |
| Affiliation: | LI Yongsheng1,WANG Weili1,TIAN Chuanyong2(1 Naval Aeronautical and Astronautical University,Shandong Yantai 264001,China,2 Chongqing Hongyu Precision Industrial Co.Ltd,Chongqing 402760,China) |
| |
| Abstract: | In order to optimize the shaped charge liner material of the first annular cutter in anti-ship missile tandem warhead,the cut effect on three single liner of copper,tungsten,iron and two composite liner of certain proportion copper-tungsten was studied by numerical simulation.The results indicated that the annular cutter of five liner schemes can penetrate 100mm steel target.The jet accumulation nest was formed by iron liner and Cu-W composite liners with less copper on the bottom of the steel target.The re... |
| |
| Keywords: | explosion mechanics annular jet shaped charge liner cut effect |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
