| 纯铜表面渗铝-内氧化磨损性能研究 |
| |
| 引用本文： | 范龙,张兴元. 纯铜表面渗铝-内氧化磨损性能研究[J]. 机械工程师, 2011, 0(6): 33-34 |
| |
| 作者姓名： | 范龙 张兴元 |
| |
| 作者单位： | 辽宁工程技术大学机械工程学院,辽宁阜新,123000 |
| |
| 摘 要： | 为了提高纯铜表面的耐磨性,利用纯铜渗铝-内氧化工艺制备了A12O3/Cu表面复合层,分析了表层的组织结构,测试了显微硬度,并进行了黏着磨损、固定磨料磨损试验。结果表明：利用纯铜渗铝-内氧化工艺能够获得弥散分布的A12O3/Cu表面复合层,其表层显微硬度、耐磨性较纯铜有较大的提高,渗铝量增大,渗铝-内氧化试样的显微硬度、耐磨性也相应提高,但不是线性关系。
|
| 关 键 词： | 渗铝-内氧化 A12O3/Cu表面复合层 显微硬度 黏着磨损 磨料磨损 |
Abrasion Resistance of Pure Copper Surface Aluminized-Internal Oxidations Sample |
| |
| FAN Long,ZHANG Xing-yuan. Abrasion Resistance of Pure Copper Surface Aluminized-Internal Oxidations Sample[J]. Mechanical Engineer, 2011, 0(6): 33-34 |
| |
| Authors: | FAN Long ZHANG Xing-yuan |
| |
| Affiliation: | (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China) |
| |
| Abstract: | In order to improve the abrasion properties of the pure copper,A12O3/Cu composite layer was prepared through internal oxidation of aluminized copper.Microstructure of A12O3/Cu composite layer were tested.And the microhardness,sticking abrasion,grain abrasion were carried out.The result indicates that the microstructure of A12O3/Cu composite layer was dispersed with fine A12O3 particles,the microhardness,abrasion resistence was higher than the pure copper.With the permeated aluminum ratio increases,aluminized-internal oxidation sample＇s microhardness,abrasion resistance also increase,but they are not linear. |
| |
| Keywords: | aluminized-internal oxidation A12O3/Cu composite layer microhardness sticking abrasion grain abrasion |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
