| 聚丙烯非织造布/无机材料粘接用胶黏剂的制备 |
| |
| 引用本文： | 包汉符,朱新生. 聚丙烯非织造布/无机材料粘接用胶黏剂的制备[J]. 产业用纺织品, 2013, 31(1): 5-10 |
| |
| 作者姓名： | 包汉符 朱新生 |
| |
| 作者单位： | 苏州大学纺织与服装工程学院,苏州,215021 |
| |
| 摘 要： | 基于物理混合法制备了氯化聚丙烯乳液型胶黏剂。通过正交试验研究了乳化剂用量、乳化温度、乳化时间对胶黏剂的粒径、黏度、剥离强度与稳定性的影响。试验发现:乳化剂用量是影响胶黏剂粒径、黏度和稳定性的最主要因素,而乳化温度和乳化剂含量对剥离强度有较大影响,只有当胶黏剂的粒径和黏度合适分散时,剥离强度最大。当氯化聚丙烯∶离子型表面活性剂(乳化剂1)∶非离子型表面活性剂(乳化剂2)的质量比为50∶2∶1,乳化温度60℃,乳化时间3 h时,所得胶黏剂的综合性能最佳。
|
| 关 键 词： | 氯化聚丙烯 胶黏剂 剥离强度 |
Manufacture of adhesive for the interfacial adhesion of polypropylene nonwovens and inorganic materials |
| |
| Bao Hanfu , Zhu Xinsheng. Manufacture of adhesive for the interfacial adhesion of polypropylene nonwovens and inorganic materials[J]. Technical Textiles, 2013, 31(1): 5-10 |
| |
| Authors: | Bao Hanfu Zhu Xinsheng |
| |
| Affiliation: | (College of Textile and Clothing Engineering,Soochow University) |
| |
| Abstract: | The chlorinated polypropylene emulsion adhesive was manufactured by the way of physical mixing method.Based on the method of orthogonal experiment,the effects of dose of emulsifier,emulsification temperature,emulsification time on latex particle size,viscosity,peel strength,stabilities of the adhesive were studied.It was found that the dose of emulsifier is the most dominant factor on the particle size,viscosity,stabilities,the emulsification temperature and content of emulsifier were most influential factors on peel strength.By particle size and viscosity of adhesive be departed,the peel strength could be the highest.While the rate of chlorinated polypropylene and ionic surface active agent and nonionic surface active agent be 50∶2∶1,emulsification temperature be 60 ℃and emulsification time be 3 hours,the comprehensive property of adhesive be the best. |
| |
| Keywords: | chlorinated polypropylene adhesive peel strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
