| 木塑复合材料注塑工艺优化研究 |
| |
| 引用本文： | 刘太闯,靳玲,徐冬梅,刘琼琼,王艳秋.木塑复合材料注塑工艺优化研究[J].化工时刊,2014(11):22-24. |
| |
| 作者姓名： | 刘太闯 靳玲 徐冬梅 刘琼琼 王艳秋 |
| |
| 作者单位： | 徐州工业职业技术学院,江苏 徐州,221140 |
| |
| 摘 要： | 采用正交分析法考察了机筒最高温度,注塑压力,保压时间,喷嘴温度对注塑木塑复合材料性能的影响,实验结果表明：在本试验中机筒最高温度对冲击强度和对拉伸强度有较大的影响,是影响冲击强度和对拉伸强度的主要因素,当最高机筒温度为185℃、注射压力为5.5-6.5 MPa、保压时间为10 s、喷嘴温度为200℃时为最优工艺。
|
| 关 键 词： | 木塑复合材料 注塑工艺 工艺优化 |
The Optimization of Wood Plastic Composites Injection Process |
| |
| Liu Taichuang,Jin Ling,Xu Dongmei,Liu Qiongqiong,Wang Yanqiu.The Optimization of Wood Plastic Composites Injection Process[J].Chemical Industry Times,2014(11):22-24. |
| |
| Authors: | Liu Taichuang Jin Ling Xu Dongmei Liu Qiongqiong Wang Yanqiu |
| |
| Affiliation: | Liu Taichuang;Jin Ling;Xu Dongmei;Liu Qiongqiong;Wang Yanqiu;Xuzhou College of Industry and Technology; |
| |
| Abstract: | The orthogonal analysis method on barrel maximum temperature,injection pressure,dwell time,the impact of temperature on the injection nozzle on plastic composite material properties was used. The experimental results showed that： the highest barrel temperature impacted on tensile strength and impact strength,and it was the main factors affecting the tensile strength and impact strength,when the maximum cylinder temperature was 185 ℃,the injection pressure was 5. 5 - 6. 5 MPa,dwell time for 10 s,the nozzle temperature was 200 ℃,the injection process is the best. |
| |
| Keywords: | WPC injection process process optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
