| Abstract: | A modular energy storing heat exchanger designed to use pentaerythritol for thermal storage (solid-solid phase change at 182°C) is tested in an oven by circulating heat transfer oil which is electrically heated in a manner to simulate a concentrating solar collector. Three efficiencies for heating the system under controlled and measured power input are determined—the heat exchanger efficiency, the efficiency of the heater with distribution lines, and the total system efficiency. Thermal energy retention times and cooking extraction times are determined, and along with the efficiencies, are compared with the results previously reported for a nonmodular heat exchanger. The modular configuration provides a highly improved extraction rate for cooking due to its wrap-around character and its increased surface-to-volume ratio. A full scale glass model of the copper tubing of the system is described and flow observations reported demonstrating how uniformly the parallel pumping branches perform and how trapped air pockets affect pumping power. A technique for measuring pumping power is described and its application to our system is quantified to show that less than 1 watt is required to circulate the heat transfer oil even when the system includes the solar collector and its longer connecting tubes. |
