| 化学镀Ni-Fe-P工艺的研究 |
| |
| 引用本文： | 李伟臣.化学镀Ni-Fe-P工艺的研究[J].电镀与环保,2011,31(2):20-21. |
| |
| 作者姓名： | 李伟臣 |
| |
| 作者单位： | 辽宁省产品质量监督检验院化工油品室,辽宁沈阳,110032 |
| |
| 摘 要： | 考察了镀液中FeSO4的质量浓度对合金镀层沉积速率的影响,并通过金相显微镜对镀层表面形貌进行观察;采用硬度计和实验室浸泡方法分别考察了镀层的显微硬度和耐蚀性.结果表明:当镀液中FeSO4的质量浓度小于2.0 g/L时,镀层的沉积速率虽然降低,但镀层的表面更加均匀、致密,表面质量更好,镀层的显微硬度和耐蚀性也得到提高;当...
|
| 关 键 词： | 化学镀 硫酸亚铁 显微硬度 耐蚀性 |
A Study of Electroless Ni-Fe-P Plating Process |
| |
| LI Wei-chen.A Study of Electroless Ni-Fe-P Plating Process[J].Electroplating & Pollution Control,2011,31(2):20-21. |
| |
| Authors: | LI Wei-chen |
| |
| Affiliation: | LI Wei-chen(Chemical Oil Product Department,Product Quality Supervision and Inspection Institute of Liaoning Province,Shenyang 110032,China) |
| |
| Abstract: | The effects of the mass concentration of FeSO_4 in the bath on the deposition rate of the alloy coating were investigated,the surface morphology of the coating were observed with metallurgical microscope,and the micro-hardness and corrosion resistance of the coating were investigated with hardness meter and laboratory soaking method.The results show that when the mass concentration of FeSO_4 in the bath is lower than 2.0 g/L,the coating depositing rate is reduced, but the coating surface is more uniform and... |
| |
| Keywords: | electroless plating ferrous sulfate micro-hardness corrosion resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
