首页 | 本学科首页   官方微博 | 高级检索  
     

高温下Al2O3/Al合金复合材料的界面稳定性和拉伸强度
引用本文:刘政,周彼德.高温下Al2O3/Al合金复合材料的界面稳定性和拉伸强度[J].南方冶金学院学报,1996,17(3):210-216.
作者姓名:刘政  周彼德
作者单位:[1]机械系 [2]哈尔滨工业大学
摘    要:利用挤压铸造制备了Al2O3/Al合金复合材料,研究了高温下复合材料的界面稳定性和拉伸强度,结果表明,在Al2O3/ZL109复合材料中,纤维与基体之间的界面上发生了化学反应,有利于纤维与基体的结合;在高温下界面层结构稳定,与基体合金相比。Al2O3/ZL109复合材料具有较好的高温拉伸强度,工作温度可提高100℃以上,另外,分析了Al2O3/ZL109复合材料高温拉抻的失效形式。

关 键 词:复合材料  氧化铝  稳定性  拉伸强度  铝合金

Interfacial Stability and the Tensile Strength of AL_2O_3/AL Alloy Composites at High Temperature
Liu Zheng, Liu Xiaomei, Zhou Bide.Interfacial Stability and the Tensile Strength of AL_2O_3/AL Alloy Composites at High Temperature[J].Journal of Southern Institute of Metallurgy,1996,17(3):210-216.
Authors:Liu Zheng  Liu Xiaomei  Zhou Bide
Affiliation:Liu Zheng; Liu Xiaomei; Zhou Bide(Department of Machinery) (Harbin Institute of Technology)
Abstract:AL2 O3/AL alloy composites are manufactured by squeeze casting and the interfacial stability and the tensile strength of the composites are studied at high temperature. The results indicate that the chemical reactions which are favourable to the combination between the fiber and the matrix occur on the interface between the fiber and the matrix in AL2 O3 /ZL109 composites, and the structures of the interfacial layer are stable at high temperature. Compared with the matrix alloy,AL2 O3 /ZL109 composites have better high temperature tensile strength and the working temperature is over 100t. In addition, the failure forms of AL2 O3 /ZL109composites at high temperature tension are analyzed.
Keywords:composite  alumina short fiber  interfacial stability  tensile strength  high temperature
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号