首页 | 本学科首页   官方微博 | 高级检索  
     

单组分脱醇型有机硅密封胶制备工艺及其性能的研究
引用本文:周如江,唐海雉,魏宁波.单组分脱醇型有机硅密封胶制备工艺及其性能的研究[J].粘接,2011(7):61-64.
作者姓名:周如江  唐海雉  魏宁波
作者单位:上海回天化工新材料有限公司,上海,201600
摘    要:以端羟基聚二甲基硅氧烷、碳酸钙、交联剂、粘接促进剂及催化剂为原料制备了单组分脱醇型有机硅密封胶.研究了制备温度、粘接促进剂种类、加料顺序对密封胶力学性能、黏度、外观、抗黄变性能的影响.结果表明,制备温度在30℃以下,密封胶具有良好的力学性能和外观;使用复配的胺类和环氧类粘接促进剂,密封胶在使用过程中长期不黄变;加料顺序...

关 键 词:有机硅密封胶  粘接促进剂  黄变  黏度峰值

Preparation and performance of one component alkoxy-functional RTV silicone sealant
ZHOU Ru-jiang,TANG Hai-xiong,WEI Ning-bo.Preparation and performance of one component alkoxy-functional RTV silicone sealant[J].Adhesion in China,2011(7):61-64.
Authors:ZHOU Ru-jiang  TANG Hai-xiong  WEI Ning-bo
Affiliation:(Shanghai Huitian New Chemical Material co., Ltd., Shanghai 2(31600, China)
Abstract:A one component alkoxy-functional RTV silicone sealant was prepared with α, ω-dihydroxyl polydimethyl siloxane, calcium carbonate, cross-linker, adhesion promoter and catastly as the raw materials. The effects of preparation temperature, mixed adhesion promoter and charging sequences were investigated. The results showed that when the preparation temperature was below 30 ℃aed good mechanical property and appearance; when used amine and epoxy mixed adhesions promoter, the sealant was not yellowing for a long period; when the charging sequence was polymer paste, dehydrator, cross-linker, in order then adhesion promoter and catalyst, the sealant preparing process can avoid the viscosity perk and be easy to operate.
Keywords:silicone sealant  adhesion promoter  turning yellow  viscosity peak
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号