| 500MPa细晶粒钢筋混凝土梁抗剪承载力试验研究 |
| |
| 引用本文： | 李朋,王命平,耿树江,杨勇新.500MPa细晶粒钢筋混凝土梁抗剪承载力试验研究[J].建筑技术,2012,43(1):45-48. |
| |
| 作者姓名： | 李朋 王命平 耿树江 杨勇新 |
| |
| 作者单位： | 1. 青岛理工大学土木工程学院,266033,山东青岛
2. 中冶集团建筑研究总院,100088,北京 |
| |
| 基金项目： | 国家863计划资助项目（2007AA032550） |
| |
| 摘 要： | 通过对16根500MPa细晶粒钢筋、1根400MPa及1根600MPa钢筋作箍筋的混凝土梁在集中荷载作用下的试验，观测不同混凝土强度、不同剪跨比、不同箍筋强度、不同配箍率、不同截面尺寸、不同截面形状等条件下试件的裂缝、挠度、承载力及破坏形态；并将实测值与有关公式的计算值进行比较。试验结果表明，构件的斜截面承载力仍可按现行《混凝土结构设计规范》（GB50010—2010）的相关公式进行计算，并有足够的安全储备。
|
| 关 键 词： | 500MPa细晶粒钢筋 斜裂缝 抗剪承载力 破坏形态 |
EXPERMENTAL STUDY ON SHEAR CAPACITY OF REINFORCED CONCRETE BEAM WITH 500MPa HOT ROLLED BARS OF FINE GRAINS |
| |
| LI Peng
,
WANG Ming-ping
,
GENG Shu-jiang
,
YANG Yong-xin.EXPERMENTAL STUDY ON SHEAR CAPACITY OF REINFORCED CONCRETE BEAM WITH 500MPa HOT ROLLED BARS OF FINE GRAINS[J].Architecture Technology,2012,43(1):45-48. |
| |
| Authors: | LI Peng WANG Ming-ping GENG Shu-jiang YANG Yong-xin |
| |
| Affiliation: | 1.College of Civil Engineering, Qingdao Technological University, 266033,Qingdao,Shandong,China; 2.Central Research Institute of Building and Construction of MCC Group,100088,Beijing,China) |
| |
| Abstract: | Based on the experiments of 16 concrete beams with 500MPa hot rolled bars of fine grains, 1 with HRB 400 bars and 1 with HRB 600 bars as stirrup under concentrated load. They are observed that the crack, deflection, bearing capacity and failure mode under the different concrete strength, different shear span ratio, different stirrup strength, different ratio of stirrup, different section size and different section shape. Some comparisons are made between test results and calculated values. The test results show that the formula in code for design of concrete structures （GB 50010-2010） can be used to calculate its shear capacity which have enough safety. |
| |
| Keywords: | 500 MPa hot rolled bars of fine grains diagonal crack shear-bearing capacity failure models |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
