| 薄板冷轧过程中宽展的变化规律及其影响因素 |
| |
| 引用本文： | 杨胜林,赵三星,王凤才,颜家森,张震. 薄板冷轧过程中宽展的变化规律及其影响因素[J]. 武汉冶金科技大学学报, 2011, 0(1): 13-17 |
| |
| 作者姓名： | 杨胜林 赵三星 王凤才 颜家森 张震 |
| |
| 作者单位： | 武汉科技大学冶金装备及其控制教育部重点实验室,湖北武汉430081 |
| |
| 基金项目： | 国家自然科学基金资助项目（10972165）; 湖北省教育厅重点资助项目（D20081104） |
| |
| 摘 要： | 基于金属流动原理,采用显式动力学有限元软件ANSYS/LS-DYNA模拟薄板轧制过程,研究轧制力、摩擦系数、压下率对轧件宽展变化的影响。结果表明,摩擦系数越大,轧件宽展也越大;轧件的最大宽展随着轧制力的增加而增大,轧制力对轧件后端部分宽展影响程度较大;压下率增大,轧件宽展随之增大,轧件各部分宽展的不均匀程度也在增加。
|
| 关 键 词： | 宽展 冷轧 显式动力学 轧制力 摩擦系数 压下率 |
Variation laws and influencing factors of lateral spread of the cold-rolled thin steel in rolling process |
| |
| Yang Shenglin,Zhao Sanxing,Wang Fengcai,Yan Jiasen,Zhang Zhen. Variation laws and influencing factors of lateral spread of the cold-rolled thin steel in rolling process[J]. , 2011, 0(1): 13-17 |
| |
| Authors: | Yang Shenglin Zhao Sanxing Wang Fengcai Yan Jiasen Zhang Zhen |
| |
| Affiliation: | (Key Laboratory of Metallurgical Equipment and Control of Ministry of Education, Wuhan University of Science and Technology,Wuhan 430081,China) |
| |
| Abstract: | Based on the theory of metal flow,the explicit dynamic FEA software ANSYS/LS-DYNA was employed to simulate the rolling process of thin steel in order to study the influence of rolling force,friction coefficient,and rolled reduction ratio on the variation of lateral spread.It is found that the lateral spread of the rolled piece can be raised when friction coefficient increases;the maximum lateral spread of the rolled piece grows with the rolling force;and the influence of the rolling force on the end section is the greatest;the lateral spread inhomogeneity increases with the reduction radio. |
| |
| Keywords: | lateral spread cold rolling explicit dynamics rolling force friction coefficient rolled reduction ratio |
| 本文献已被 维普 等数据库收录！ |
|
