| 石灰干式消化工艺参数优化选择 |
| |
| 引用本文： | 魏仁零,吴晓琴,陈云,吴高明.石灰干式消化工艺参数优化选择[J].武汉冶金科技大学学报,2011(6):473-477. |
| |
| 作者姓名： | 魏仁零 吴晓琴 陈云 吴高明 |
| |
| 作者单位： | [1]武汉科技大学化学工程与技术学院,湖北武汉430081 [2]武汉钢铁（集团）公司烧结厂,湖北武汉430083 [3]武汉钢铁（集团）公司安环部,湖北武汉430081 |
| |
| 基金项目： | 武汉市科委节能减排项目（WG/01T1/QR070303） |
| |
| 摘 要： | 采用小型间歇消化装置,用正交试验法研究消化参数对石灰干式消化速度及消石灰结构性能的影响。实验结果表明,消化参数对消化结果的影响从大到小排序为：消化时间〉水灰比〉搅拌速度〉消化水初始温度。优化后的工艺参数：消化时间为5～10min;水灰比（摩尔比）为1.3～1.6;搅拌速度为250～300r/min;消化水初始温度为25～45℃。优化工艺参数下制备的消石灰比表面和孔隙率最大可达25.69m2.g-1和75.09%。
|
| 关 键 词： | 生石灰 干式消化 消化参数 优化 |
Selection and optimization of technological parameters for dry slaking of quicklime |
| |
| Authors: | Wei Renling Wu Xiaoqin Chen Yun Wu Gaoming |
| |
| Affiliation: | 1.College of Chemical Engineering and Technology,Wuhan University of Science and Technology, Wuhan 430081,China;2.Ore Sintering Plant,Wuhan Iron and Steel Corporation,Wuhan 430083,China; 3.Safety and Environment Department,Wuhan Iron and Steel Corporation,Wuhan 430081,China) |
| |
| Abstract: | A set of small batch slaking system was used in experiments for investigating the effects of technological parameters on the dry slaking speed of quicklime and the properties of slaked lime by means of orthogonal experimental method.It is found that the factors impacting the slaking process from high to low are slaking time,water/solid ratio,stirring rate,and initial temperature of slaking water.On this basis,the optimal conditions of the dry quicklime slaking process are proposed to be 5~10 min in slaking time,（1.3～1.6）∶1 in water/ solid ratio,250 ～300 r/min in stirring rate,and 25 ～45 ℃ in initial temperature of slaking water.Correspondingly,the largest specific surface and porosity of the last dry white lime are 25.69 m^2 ·g^-1 and 75.09%,respectively. |
| |
| Keywords: | quicklime dry slaking technological factor optimization |
| 本文献已被 维普 等数据库收录！ |
|
