首页 | 本学科首页   官方微博 | 高级检索  
     

高分子湿度传感器的研制
引用本文:陈翠萍,蒋波,谢光忠,蒋亚东.高分子湿度传感器的研制[J].仪表技术与传感器,2005(10):4-5,8.
作者姓名:陈翠萍  蒋波  谢光忠  蒋亚东
作者单位:电子科技大学光电子信息学院新型传感器教育部重点实验室,四川,成都,610054
基金项目:部级预研项目基金资助 (323030411 )
摘    要:通过对湿敏材料—聚酰亚胺(PI)的湿敏机理的分析,设计了高分子电容式湿度传感器的芯片结构,并对其制作工艺进行了详细讨论。在此基础上,对传感器变送电路进行了研究,设计了以双时基电路为主的信号处理电路,并最终制备出了输出电压随环境相对湿度线性变化的湿度传感器。对湿度传感器的湿敏特性的测试表明:在1.82%~91.04%RH范围内,带湿度处理电路的湿度传感器输出的信号与环境的相对湿度成线性变化,电路能对湿度电容输出电容量进行放大。

关 键 词:聚酰亚胺  传感器  湿度
文章编号:1002-1841(2005)10-0004-03
收稿时间:2004-10-18
修稿时间:2004-10-182005-06-24

Research on High Polymer Capacitive Humidity Sensor
CHEN Cui-ping,JIANG Bo,Xie Guang-zhong,JIANG Ya-dong.Research on High Polymer Capacitive Humidity Sensor[J].Instrument Technique and Sensor,2005(10):4-5,8.
Authors:CHEN Cui-ping  JIANG Bo  Xie Guang-zhong  JIANG Ya-dong
Abstract:Through the analysis of the polyimide humidity sensitive mechanism, the structure of humidity sensor was designed and the humidity sensor manufacture process was discussed in detailed. Through the research of the sensor transducer circuit, the signal process circuit was designed mainly through dual timer IC, Finally, the humidity sensor, which the change of output voltage followed was fabricated. The test for the sensitivity of humidity sensor shows that the humidity sensitive curve is very linear corresponding to environment humidity from 1.82%RH to 91.04%RH , and the signal process circuit could amplify the output capacity which represents change of environment humidity,
Keywords:Polyimide  Sensor  Humidity
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号