|
|||||
|
|
| 卧式离心浇铸法生产MC尼龙棒 | |
| 引用本文： | 曾上游,林轩,刘成.卧式离心浇铸法生产MC尼龙棒[J].工程塑料应用,2011,39(10):52-54. |
| 作者姓名： | 曾上游 林轩 刘成 |
| 作者单位： | 1. 广东省华南师大附中国际学校,广州,510630 2. 仲恺农业工程学院化学化工学院,广州,510225 3. 广州市南方尼龙制品有限公司,广州,510700 |
| 摘 要： | 在模具设计中,通过改变浇铸流道方向,设计制造出一系列不同规格的组合模具,开发了卧式离心浇铸法生产MC尼龙棒的工艺技术,制备了一系列不同规格的旋转棒,并对产品进行了分析测试.结果表明,采用卧式离心浇铸法生产MC尼龙棒是有效可行的,可完全消除MC尼龙棒材中的收缩孔和内部缺陷.卧式离心浇铸法具有生产效率高、产品质量好、成品率... |
| 关 键 词： | MC尼龙棒 卧式离心浇铸技术 组合模具 |
PRODUCTION OF MC NYLON ROD USING HORIZONTAL CENTRIFUGAL CASTING TECHNIQUE |
|
| Zeng Shangyou,Lin Xuan,Liu Cheng.PRODUCTION OF MC NYLON ROD USING HORIZONTAL CENTRIFUGAL CASTING TECHNIQUE[J].Engineering Plastics Application,2011,39(10):52-54. | |
| Authors: | Zeng Shangyou Lin Xuan Liu Cheng |
| Affiliation: | (1.Affiliated High School of South China Normal University,Guangzhou 510630,China; 2.College of Chemistry and Chemical Engineering,Zhongkai University of Agriculture and Engineering,Guangzhou 510225,China; 3.Nanfang Nylon Products Co.Ltd.,Guangzhou 510700,China) |
| Abstract: | In the mold design,by changing the flow direction of casting,different specifications of combinations of die were designed and produced.The horizontal centrifugal casting technique was developed to produce MC nylon rod.A series of rotating rods were made,and products were analyzed.The results showed that the horizontal centrifugal casting technique to produce MC nylon rod was feasible and effective,could completely eliminate MC nylon shrink hole and internal defects.The horizontal centrifugal casting method had advantages of high production efficiency,good product quality,high yield,low loss,good benefits and so on. |
| Keywords: | MC nylon rod horizontal centrifugal casting technique combinations of die |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |