| 冲头式挤压铸造工艺参数对ZA27合金力学性能的影响 |
| |
| 引用本文： | 于海朋,李荣德. 冲头式挤压铸造工艺参数对ZA27合金力学性能的影响[J]. 特种铸造及有色合金, 1999, 0(3): 30-32 |
| |
| 作者姓名： | 于海朋 李荣德 |
| |
| 作者单位： | 沈阳工业大学 |
| |
| 摘 要： | 采用正交试验分析了冲头式挤压铸造工艺参数对ＺＡ２７合金力学性能指标的影响。结果表明：ＺＡ２７合金冲头式挤压铸造工艺参数影响的主次顺序为比压、铸型温度、浇注温度和保压时间。在适宜的工艺参数下ＺＡ２７合金力学性能可以达到：σｂ＝４４０ＭＰａ，δ５＝１２％，ＨＢＳ１３０
|
| 关 键 词： | 正交试验 冲头式挤压铸造 ZA27合金 |
| 修稿时间： | 1998-12-17 |
Effect of Punching Squeeze Casting Processing onMechanical Property for ZA27 Alloy |
| |
| Yu HaipengZhang ZhongyuanLi RongdeYing Jingtian. Effect of Punching Squeeze Casting Processing onMechanical Property for ZA27 Alloy[J]. Special Casting & Nonferrous Alloys, 1999, 0(3): 30-32 |
| |
| Authors: | Yu HaipengZhang ZhongyuanLi RongdeYing Jingtian |
| |
| Affiliation: | Shenyang Polytechnic University |
| |
| Abstract: | The effect of experimental variables on the mechanical properties for ZA27 casting alloy during punching squeeze casting processing has been investigated on the basis of orthogonal experiment. The result shows the order of influential factors as:specific pressure, die temperature,pouring temperature and pressure holding time. At a proper valve of these factors,the mechanical property of the ZA27 alloy could reach b=440 MPa,s=12%,HBS130. |
| |
| Keywords: | Orthogonal Experiment Punching Squeeze Casting ZA27 Alloy Mechanical Property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
