|
|||||
|
|
| Bulk nanocrystalline Al prepared by cryomilling | |
| 作者姓名： | Junsheng Cheng Hua Cui Hanbin Chen Bin Yang Jianzhong Fan and Jishan Zhang State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing Beijing China Materials Science and Engineering School University of Science and Technology Beijing Beijing China Beijing General Research Institute for Nonferrous Metals Beijing China |
| 作者单位： | Junsheng Cheng1)，Hua Cui2)，Hanbin Chen1)，Bin Yang1)，Jianzhong Fan3)，and Jishan Zhang1) 1) State Key Laboratory for Advanced Metals and Materials，University of Science and Technology Beijing，Beijing 100083，China 2) Materials Science and Engineering School，University of Science and Technology Beijing，Beijing 100083，China 3) Beijing General Research Institute for Nonferrous Metals，Beijing 100088，China |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| 摘 要： | Bulk nanocrystalline Al was fabricated by mechanically milling at cryogenic temperature (cryomilling) and then by hot pressing in vacuum. By using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the microstructure evolution of the material during cryomilling and consolidation was investigated. With increasing the mill- ing time, the grain size decreased sharply and reduced to 42 nm when cryomilled for 12 h. The grains had grown up, and the colum- nar grain was formed under the hot pressing and extrusion compared with the cryomilled powders. The grain size of as-extruded specimen was approximately 300-500 nm. The reason of high thermal stability of this bulk was attributed primarily to the Zener pin- ning from the grain boundary of the AlN arising from cryomilling and the solute drag of the impurity. Tensile tests show that the strength of nanocrystalline Al is enhanced with decreasing grain size. The ultimate tensile strength and tensile elongation were 173 MPa and 17.5%, respectively. It appears that the measured high strength in the cryomilled Al is related to a grain-size effect, disper- sion strengthening, and dislocation strengthening. |
| 关 键 词： | 热稳定性 加固机制 体积 金属 |
| 收稿时间： | 15 December 2006 |
Bulk nanocrystalline Al prepared by cryomilling |
|
| Junsheng Cheng,Hua Cui,Hanbin Chen,Bin Yang,Jianzhong Fan,and Jishan Zhang State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing ,China Materials Science and Engineering School,University of Science and Technology Beijing,Beijing ,China Beijing General Research Institute for Nonferrous Metals,Beijing ,China.Bulk nanocrystalline Al prepared by cryomilling[J].Journal of University of Science and Technology Beijing,2007,14(6):523-528. | |
| Authors: | Junsheng Cheng Hua Cui Hanbin Chen Bin Yang Jianzhong Fan Jishan Zhang |
| Affiliation: | 1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China 2. Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3. Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China |
| Abstract: | Bulk nanocrystalline Al was fabricated by mechanically milling at cryogenic temperature (cryomilling) and then by hot pressing in vacuum. By using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the microstructure evolution of the material during cryomilling and consolidation was investigated. With increasing the milling time, the grain size decreased sharply and reduced to 42 nm when cryomilled for 12 h. The grains had grown up, and the columnar grain was formed under the hot pressing and extrusion compared with the cryomilled powders. The grain size of as-extruded specimen was approximately 300-500 nm. The reason of high thermal stability of this bulk was attributed primarily to the Zener pinning from the grain boundary of the AlN arising from cryomilling and the solute drag of the impurity. Tensile tests show that the strength of nanocrystalline Al is enhanced with decreasing grain size. The ultimate tensile strength and tensile elongation were 173 MPa and 17.5%, respectively. It appears that the measured high strength in the cryomilled Al is related to a grain-size effect, dispersion strengthening, and dislocation strengthening. |
| Keywords: | nanocrystalline Al cryomilling thermal stability strengthening mechanism |
| 本文献已被 CNKI 维普 万方数据 ScienceDirect 等数据库收录！ | |