| 槽型芯湿法烟气脱硫的实验研究 |
| |
| 引用本文： | 喻舒. 槽型芯湿法烟气脱硫的实验研究[J]. 电站系统工程, 2005, 21(6): 43-44,50 |
| |
| 作者姓名： | 喻舒 |
| |
| 作者单位： | 哈尔滨电站工程有限责任公司 |
| |
| 摘 要： | 湿法烟气脱硫是一个化学反应和传质同时进行的过程,其影响因素众多,如液体浓度、液体流动状况、气体流动状况、液气比、浆液pH值等。提出一种横向冲刷槽型芯湿法脱硫技术,通过试验的方法,研究了影响脱硫效率的诸多因素并进行了分析。
|
| 关 键 词： | 槽型芯 湿法烟气脱硫 传质 液气比 尾部烟气再热 |
| 文章编号： | 1005-006X（2005）06-0043-03 |
| 收稿时间： | 2005-08-15 |
| 修稿时间： | 2005-08-15 |
Experimental Study of Wet Flue Gas Desulfurization by Groove Pole |
| |
| YU Shu. Experimental Study of Wet Flue Gas Desulfurization by Groove Pole[J]. Power System Engineering, 2005, 21(6): 43-44,50 |
| |
| Authors: | YU Shu |
| |
| Abstract: | Many factors, such as the concentration of the solution, the flowing status of the solution and gas, the L/Q rate, and the pH value, influence the process of wet FGD. A new FGD technology is put forward. The influencing factors for desulphurization efficiency are studied and analyzed by the experiment. |
| |
| Keywords: | groove pole wet flue gas desulfurization(FGD) mass transfer L/Q rate flue gas reheat |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
