| Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method |
| |
| 作者姓名： | 司良英 吕程 K. Tieu 刘相华 |
| |
| 作者单位： | [1]State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China [2]School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Northfields Avenue, Wollongong NSW 2522, Australia |
| |
| 摘 要： | The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.
|
| 关 键 词： | 晶体 可塑性 有限元分析 多晶模型 纹理 |
| 收稿时间： | 15 July 2007 |
| 修稿时间： | 2007-07-15 |
Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method |
| |
| Liang-ying SI, LÜ Cheng, K. Tieu,Xiang-hua LIU.Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method[J].Transactions of Nonferrous Metals Society of China,2007,17(6):1412-1416. |
| |
| Authors: | Liang-ying SI LÜ Cheng K Tieu Xiang-hua LIU |
| |
| Affiliation: | 1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China; 2. School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Northfields Avenue, Wollongong NSW 2522, Australia |
| |
| Abstract: | The crystal plasticity was implemented in the finite element method(FEM) software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function(ODF). The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain—stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries. |
| |
| Keywords: | crystal plasticity finite element method polycrystal modeling Voronoi diagram texture face-centered cubic crystal |
| 本文献已被 维普 万方数据 ScienceDirect 等数据库收录！ |
