活性炭负载对甲苯磺酸铜催化合成乙酸正丁酯

以活性炭为载体，采用浸渍法制备了负载对甲苯磺酸铜催化剂，并以乙酸正丁酯的合成为模型反应，对催化剂的催化酯化反应性能进行初步评价，考察了负载量、催化剂用量和反应时间等因素对酯化反应的影响，利用XRD对反应前、后的催化剂进行了表征。结果表明，在对甲苯磺酸铜负载质量分数20％、催化剂用量1.2 g、反应时间150 min和醇酸物质的量比1.5∶1的条件下，酯化率达93.1％，催化剂可重复使用。

Synthesis of n-butyl acetate over activated carbon supported copper p-toluene sulfonate

Activated carbon sup copper p-toluene sulfonate was prepared by impregnation method and used as a catalyst for esterification. The influence of copper p-toluene sulfonate loadings, catalyst dosage and reaction time on esterification yield was in model reaction. The fresh and used catalysts were indicated that copper p-toluene sulfonate supported vestigated using synthesis of n-butyl acetate as the characterized by XRD. The experimental results on activated activity for synthesis of n-butyl acetate, with esterification yield condition as follows： 150 min, n-butanol copper p-toluene sulfonate loadings to acetic acid molar ratio 1.5： 1. The = 20%, catalyst carbon exhibited excellent catalytic of up to 93.1% under the reaction catalyst dosage 1.2 g, reaction time was repeatedly usable.