首页 | 本学科首页   官方微博 | 高级检索  
     

倾角对面接触润滑油膜厚度影响的实验测量
引用本文:王 源,郭 峰,栗心明,白清华. 倾角对面接触润滑油膜厚度影响的实验测量[J]. 润滑与密封, 2015, 40(5): 22-25
作者姓名:王 源  郭 峰  栗心明  白清华
作者单位:青岛理工大学,青岛理工大学,青岛理工大学,青岛理工大学
基金项目:国家自然科学基金项目(51275252).
摘    要:在全膜润滑和有限供油润滑条件下,利用面接触润滑油膜测量系统对不同滑块倾角下的油膜厚度进行测量。结果表明,在全膜润滑条件下,随倾角的增大膜厚表现为先上升再下降的趋势;当膜厚较高时,最高油膜承载力对应的收敛比接近理论值;当膜厚降至亚微米量级时,最高承载力对应的收敛比增加,与经典理论不符。而在有限供油条件下,随速度增加油膜厚度先增大后基本保持不变;随倾角变化,油膜厚度变化与全膜润滑相近。

关 键 词:面接触;油膜厚度  收敛比;倾角

On the Influence of Slider Inclination on Lubricating Film Thickness In a Slider-on-disc Conformal Contact
Abstract:Under fully flooded and limited lubricant supply, the influence of slider inclination on lubricating film thickness was studied in a slider-on-disc conformal contact. The results show that, under full lubricant supply, film thickness is increased first and then decreased with the increasing of inclination. When the film thickness is high, the convergence ratio at the largest load-carrying capacity is very close to the theoretical value. When the film thickness is low to the submicron dimension, the convergence ratio at the largest load-carrying capacity is much higher than the theoretical value. Under limited lubricant supply, the film thickness is increased first and then remains unchanged with the increasing of speed. The variation of film thickness with inclination is similar to that under full lubricant supply.
Keywords:conformal contact   film thickness   convergence ratio   inclination
本文献已被 万方数据 等数据库收录!
点击此处可从《润滑与密封》浏览原始摘要信息
点击此处可从《润滑与密封》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号