首页 | 本学科首页   官方微博 | 高级检索  
     

分布式光储直流供电系统非线性平滑可微控制方法
引用本文:薛花,李海霞,王育飞.分布式光储直流供电系统非线性平滑可微控制方法[J].电力系统自动化,2016,40(18):102-108.
作者姓名:薛花  李海霞  王育飞
作者单位:上海电力学院电气工程学院, 上海市 200090,上海电力学院电气工程学院, 上海市 200090,上海电力学院电气工程学院, 上海市 200090
基金项目:国家自然科学基金资助项目(51407114);上海市自然科学基金资助项目(15ZR1418200)
摘    要:针对分布式光储直流供电系统变流装置传统拓扑占空比调节方式约束电压输出范围的问题,提出四相交错式变流器的设计架构,有效拓宽输出电压范围,同时抑制光伏输出电压波动。系统拓扑中,光伏单元四相交错升压变流器设计改进的极值搜索法,实现光伏输出的最大功率点跟踪,提高光照阶跃变化情况下系统的快速性和稳定性;储能电池四相交错双向变流器设计非线性平滑可微控制方法,实现光储最优协调控制,确保存在负载突变或控制参数摄动的情况下,系统依然能够保持直流母线电压平稳,输出功率平滑。仿真与实验结果表明:较传统的比例—积分(PI)控制方法,所提出的非线性平滑可微控制方法具有结构简单、自由度宽、稳态误差小、系统稳定性好等特点。

关 键 词:直流供电系统  平滑可微控制  四相交错变流器  改进的极值搜索法
收稿时间:2015/11/20 0:00:00
修稿时间:2016/7/29 0:00:00

Nonlinear Differential Flatness Control of Distributed Photovoltaic-Energy Storage DC Generation System
XUE Hu,LI Haixia and WANG Yufei.Nonlinear Differential Flatness Control of Distributed Photovoltaic-Energy Storage DC Generation System[J].Automation of Electric Power Systems,2016,40(18):102-108.
Authors:XUE Hu  LI Haixia and WANG Yufei
Affiliation:School of Electric Power Engineering, Shanghai University of Electric Power, Shanghai 200090, China,School of Electric Power Engineering, Shanghai University of Electric Power, Shanghai 200090, China and School of Electric Power Engineering, Shanghai University of Electric Power, Shanghai 200090, China
Abstract:As the traditional converters in distributed photovoltaic-energy storage direct current(DC)generation system will be limited when the power increases or is at higher step-up ratios, four-phase parallel converters are adopted in the proposed system, which can broaden the range of output voltage and suppress oscillation of photovoltaic output voltage. For photovoltaic four-phase parallel boost converters, an improved extremum seeking algorithm is designed to achieve maximun power point tracing and improve the system rapidity and stability in light step change. For energy storage four-phase parallel bidirectional converters, a novel nonlinear control law based on the flatness principle is proposed, which is a simple solution to smooth the output power and stabilize the system with a load mutation or control parameter perturbation. Compared with the conventional proportional-integral control method, the nonlinear differential flatness control algorithm has broader degrees of freedom, fewer steady-state errors and better system stability as proved by simulation and experimental results. This work is supported by National Natural Science Foundation of China(No. 51407114), Shanghai Natural Science Foundation(No. 15ZR1418200)and Shanghai Engineering Research Center of Green Energy Grid-Connected Technology(No. 13DZ2251900).
Keywords:direct current(DC)generation system  differential flatness control  four-phase parallel converters  improved extremum seeking algorithm
本文献已被 CNKI 等数据库收录!
点击此处可从《电力系统自动化》浏览原始摘要信息
点击此处可从《电力系统自动化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号