| 侧面叉车车架结构与有限元分析 |
| |
| 引用本文： | 王志强,卞学良,罗明军,陈顺伟. 侧面叉车车架结构与有限元分析[J]. 机械设计与制造, 2007, 0(9): 13-15 |
| |
| 作者姓名： | 王志强 卞学良 罗明军 陈顺伟 |
| |
| 作者单位： | 1. 河北工业大学,土木工程学院,天津,300130
2. 河北工业大学,机械学院,天津,300130 |
| |
| 摘 要： | 给出了一种侧面叉车侧板承载框架式车架结构.利用UG软件对叉车车架进行实体建模,并将模型导入Hyperworks软件中,建立以shell单元为基本单元,采用node-node焊接方法的车架有限元模型,分析了车架的强度,为侧面叉车车架的设计提供了参考依据.
|
| 关 键 词： | 车架 有限元分析 UG Hyperworks 侧面叉车 车架结构 有限元分析 forklift frame finite element analysis 参考依据 设计 强度 有限元模型 焊接方法 基本单元 shell Hyperworks 实体建模 软件 利用 框架式 侧板 |
| 文章编号： | 1001-3997（2007）09-0013-03 |
| 修稿时间： | 2006-11-22 |
The structural and finite element analysis of the frame of sideway forklift |
| |
| WANG Zhi-qiang,BIAN Xue-liang,LUO Ming-jun,CHEN Shun-wei. The structural and finite element analysis of the frame of sideway forklift[J]. Machinery Design & Manufacture, 2007, 0(9): 13-15 |
| |
| Authors: | WANG Zhi-qiang BIAN Xue-liang LUO Ming-jun CHEN Shun-wei |
| |
| Affiliation: | 1,School of Civil Engineering, Hebei University of Technology ,Tianjin 300130, China;2. School of Mechanical Engineering, Hebei University of Technology ,Tianjin 300130, China |
| |
| Abstract: | One kind of frame of sideway Forklift is presented. The entity model of the frame is created using UG and Translated into Hyperworks. Based on shell units and node-node welding mode, the finite element model of the frame is set up, also the strength analysis has been done which provides the basis for optimization design. |
| |
| Keywords: | Frame Finite element analysis UG Hyperworks |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
