| 压出式瓶盖注射模设计 |
| |
| 引用本文： | 严丽,黄国强.压出式瓶盖注射模设计[J].机械设计与制造,2007(4):153-154. |
| |
| 作者姓名： | 严丽 黄国强 |
| |
| 作者单位： | 1. 广东轻工职业技术学院,广州,510300
2. 长江精工钢构公司,广州,510630 |
| |
| 摘 要： | 通过对压出式瓶盖的工艺分析,设计了一模四腔的注塑模.在模具中设计了圆锥螺纹脱模机构、弧形侧抽芯机构和其它结构的设计,以及介绍了模具工作过程.
|
| 关 键 词： | 分型 注射成型 脱模机构 弧形侧抽芯 瓶盖 注射模设计 press Injection mould 过程 工作 结构 侧抽芯机构 弧形 脱模机构 圆锥螺纹 模具 注塑模 一模四腔 工艺分析 |
| 文章编号： | 1001-3997(2007)04-0153-02 |
| 修稿时间： | 2006-08-07 |
Design of the Injection mould for press out lid |
| |
| YAN Li,HUANG Guo-qiang.Design of the Injection mould for press out lid[J].Machinery Design & Manufacture,2007(4):153-154. |
| |
| Authors: | YAN Li HUANG Guo-qiang |
| |
| Affiliation: | 1. Guangdong Industry Technical College, Guangzhou, Guangzhou 510300, China; 2. Changjiang Industry Steel-Structure Company, Guangzhou 510630, China |
| |
| Abstract: | A set of mould with one module and four cavities has been designed through the analysis of the technology of press out lid. Demoulding mechanism of taper thread and arc side core-pulling mechanism was used in the mold, and the design process of other make up,and working process of the mould are specified in detail. |
| |
| Keywords: | Cavity parting Injection molding Demoulding mechanism Arc side core-pulling mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
