|
|||||
|
|
| 两种材料对异型气雾罐胀形的影响 | |
| 引用本文： | 崔树平,宋志平,黄特,崔涵. 两种材料对异型气雾罐胀形的影响[J]. 塑性工程学报, 2010, 17(1). DOI: 10.3969/j.issn.1007-2012.2010.01.018 |
| 作者姓名： | 崔树平 宋志平 黄特 崔涵 |
| 作者单位： | 1. 山西机电职业技术学院,长治,046011 2. 永康市职业学校,永康,321300 3. 中北大学,太原,030051 |
| 摘 要： | 为提高异型金属气雾罐气压胀形的成形质量,减少壁厚减薄严重及皱折破裂等成形缺陷,采用数值模拟方法,对比分析T3镀锡钢和3A21铝两种材料对异型气雾罐气压胀形的影响,研究结果为合理选用罐坯材料提供依据。 |
| 关 键 词： | 异型气雾罐 材料 数值模拟 |
The effect of different materials on the pneumatic bulging of aerosol pot with special form |
|
| CUI Shu-ping,SONG Zhi-ping,HUANG Te,CUI Han. The effect of different materials on the pneumatic bulging of aerosol pot with special form[J]. Journal of Plasticity Engineering, 2010, 17(1). DOI: 10.3969/j.issn.1007-2012.2010.01.018 | |
| Authors: | CUI Shu-ping SONG Zhi-ping HUANG Te CUI Han |
| Affiliation: | CUI Shu-ping SONG Zhi-ping(Shanxi Institute of Mechanical , Electrical Engineering,Changzhi 046011 China)HUANG Te(Yongkang Vocational School,Yongkang 321300 China)CUI Han(North University of China,Taiyuan 030051 China) |
| Abstract: | To enhance the quality of the special aerosol pot formed by pneumatic bulging and reduce the forming defects including serious thickness thinning,wrinkling and bursting,numerical simulation method was introduced to compare and analyze the effect of T3 tinned steel and 3A21 aluminum on the pneumatic bulging of the aerosol pot.The results provide the basis to select material for the aerosol pot. |
| Keywords: | special aerosol pot materials numerical simulation experiments |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |