| 一种新型滚动轴承表面形貌测量仪 |
| |
| 引用本文： | 杨旭东,谢铁邦. 一种新型滚动轴承表面形貌测量仪[J]. 轴承, 2007, 0(4): 33-36 |
| |
| 作者姓名： | 杨旭东 谢铁邦 |
| |
| 作者单位： | 1. 华中科技大学,机械工程学院,武汉,430074;贵州大学,机械工程学院,贵阳,550025
2. 华中科技大学,机械工程学院,武汉,430074 |
| |
| 基金项目： | 杨旭东（1972-）,男,讲师,博士研究生,研究方向为测试计量技术与仪器.E-mail：yxd_gzu@163.com. |
| |
| 摘 要： | 介绍了一种新型的滚动轴承表面形貌测量仪,它采用一种全新的能越过陡峭表面的二维位移传感器和垂直扫描三维工作台组成一个闭环控制系统,将传统的触针移动扫描方式改变为工作台移动扫描方式。在测量工件时,二维位移传感器的测量杠杆总是不断地回到平衡位置,因此即使增大量程,由杠杆转动所引起的测量非线性误差也非常小。该仪器不仅可进行二维轮廓测量,还可进行三维形貌测量,具有大量程、高精度、小测量力和更多测量参数等特点。
|
| 关 键 词： | 滚动轴承 表面形貌 闭环控制系统 非线性误差 量程 |
| 文章编号： | 1000-3762（2007）04-0033-04 |
| 收稿时间： | 2006-11-05 |
| 修稿时间： | 2007-01-09 |
A Novel Measuring Instrument for Surface Topography of Bearings |
| |
| YANG Xu-dong,XIE Tie-bang. A Novel Measuring Instrument for Surface Topography of Bearings[J]. Bearing, 2007, 0(4): 33-36 |
| |
| Authors: | YANG Xu-dong XIE Tie-bang |
| |
| Affiliation: | 1.School of Mechanical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; 2. School of Mechanical Engineering, Guizhou University, Guiyang 550025, China |
| |
| Abstract: | This paper introduces a novel measuring instrument for surface topography of bearings.The closed loop control system is composed of a novel 2D displacement sensor that can skim over the steep wall successfully and a 3D platform based on vertical scanning,which changes the traditional moving stylus scanning style into the moving platform scanning style.When the workpiece is measured,the lever of the 2D displacement sensor is always in balance position.So the non-linear error caused by the rotation of the lever is very small in spite of the measuring range.The instrument can measure not only 2D profile but also 3D topography,and it has large measuring range,high precision,small measuring touch force and more parameters. |
| |
| Keywords: | rolling bearing surface topography closed loop control system non-linear error measuring range |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
