| 原位观察TiN粒子对低合金高强度钢模拟焊接热影响区粗晶区晶粒细化作用 |
| |
| 作者姓名： | 万响亮 李光强 吴开明 |
| |
| 作者单位： | 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,武汉,430081;武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,武汉,430081;武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,武汉,430081 |
| |
| 基金项目： | 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室开放基金资助项目(FMRU201306)中国博士后科学基金资助项目(2014M550414) |
| |
| 摘 要： | 采用高温激光共聚焦显微镜原位观察和电子背散射衍射技术研究TiN粒子在低合金高强度钢模拟大线能量焊接热循环过程中晶粒细化效果.研究发现合理的Ti和N含量能形成大量细小弥散分布的纳米级TiN粒子,在焊接热循环过程中有效钉扎热影响区粗晶区奥氏体晶界,抑制晶粒粗化.同时,TiN附着在Al2O3表面析出,在冷却过程中有效促进针状铁素体形核,得到有效晶粒尺寸非常细小的由少量针状铁素体和大量贝氏体构成的复合组织.
|
| 关 键 词： | 高强度钢 低合金钢 热影响区 晶粒细化 氮化钛 原位观察 |
| 收稿时间： | 2015-01-22 |
In-situ observations of grain refinement by TiN particles in the simulated coarse-grained heat-affected zone of a high-strength low-alloy steel |
| |
| Affiliation: | Key Laboratory for Ferrous Metallurgy and Resources Utilization ofthe Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China |
| |
| Abstract: | The effect of grain refinement by TiN particles in the simulated coarse-grained heat-affected zone of a high-strength low-alloy steel was investigated by means of analytical characterization techniques such as in-situ microscopy and electron back scattered diffraction analysis. Abundant finely dispersed nanoscale TiN particles form in the specimen and effectively retard the grain boundary migration during simulated high heat input welding,which results in refined austenite grains. TiN precipitates on the surface of aluminum oxide,which is the effective nucleation site for acicular ferrite during the cooling process and induces the austenite transform to the fine-grained mixed microstructure of a small proportion of acicular ferrite embedded in predominantly bainite. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《》浏览原始摘要信息 |
|
点击此处可从《》下载全文 |
