Influence of drying temperature upon some mechanical properties of beech wood

The paper presents the results obtained in an experimental study concerning the influence of drying temperature upon the mechanical properties of beech wood (Fagus sylvatica L.). Sound wood samples without red heart were cut from white (unsteamed) beech timber parts, dried at different temperatures: 20 °C, 80 °C, 90 °C, 100 °C, 115 °C and same relative air humidity: 50%. After performing classical tests for evaluation of some selected mechanical properties, the following conclusions could be drawn: all bending properties (static bending strength, modulus of elasticity and impact bending strength) increased with increasing temperature, confirming thus the benefiting effect of heat upon wood plasticity. The tensile strengths, both parallel and perpendicular to grain, increased with increasing temperature, but only in the range below 100 °C; as soon as the temperature exceeded this value, the tensile strengths began decreasing. As far as compression strength parallel to grain, shearing strength and splitting resistance is concerned, no significant influence of temperature could be established. However, it seems that these properties are negatively affected by kiln-drying, as even with low kiln-drying temperatures these strengths are much lower than in case of air-drying.