Melt fracture of two broad molecular weight distribution high‐density polyethylenes

The melt fracture instabilities of two broad molecular weight distribution (MWD) high‐density polyethylenes (one Ziegler–Natta and one metallocene HDPEs) are studied as functions of the temperature and geometrical details and type of die (cylindrical, slit, and annular). It is found that sharkskin and other melt fracture phenomena are distinctly different for these resins, despite their almost identical rheology. It is also found that the critical conditions for the onset of various melt fracture phenomena depend significantly on the type of die used for their study. For example, sharkskin melt fracture in slit and capillary extrusion was obtained at much small critical shear stress values compared with those found in annular extrusion. Moreover, the metallocene HDPE shows significant slip at the die wall in the sharkskin flow regime. On the other hand, the Ziegler–Natta HDPE has shown no sign of slip. These differences are discussed on the basis of differences in their MWDs that influence their melt elasticity. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers