首页 | 本学科首页   官方微博 | 高级检索  
     


Modeling of spray deposition: Measurements of particle size,gas velocity,particle velocity,and spray temperature in Gas-Atomized sprays
Authors:B P Bewlay  B Cantor
Affiliation:(1) Corporate Research and Development, General Electric Company, 12301 Schenectady, NY;(2) Department of Metallurgy and Science of Materials, Oxford University, OX1 3PK Oxford, UK
Abstract:Spray deposition is a novel manufacturing process which is currently being developed for producing near-net-shape preforms. Spray deposition involves the creation of a spray of droplets by a gas atomizer and the consolidation of these droplets on a substrate to create a preform. In order to maximize the metallurgical benefits of spray deposition, a thorough characterization of momentum and heat transfer in the gas-atomized spray is required. The present paper describes measurements of particle size, gas velocity, particle velocity, and spray temperature in gasatomized Sn-Pb sprays. Measurements were performed on steady-state axisymmetric sprays which were generated using a close-coupled gas atomizer with Sn-5 wt p t Pb and Sn-38 wt p t Pb alloys, atomizer gas flow rates of 2.5 g/s (0.56 MPa) and 3.4 g/s (1.04 MPa), melt flow rates of 35 and 61 g/s, and atomizer-substrate distances of 180 and 360 mm. Gas velocities in the range to 4 m/s were measured using Pitot tube and laser Doppler anemometry (LDA). Droplet velocities in the range 3 to 32 m/s were determined from photographic streak-length measurements and LDA. Oil calorimetry of the spray enthalpy indicated that the spray temperature decreased with increasing axial distance from the gas atomizer, increasing gas flow rate, and decreasing melt flow rate. Formerly Doctoral Student, Department of Metallurgy and Science of Materials, Oxford University
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号