| 喷雾器喷头注塑模设计 |
| |
| 引用本文： | 段武茂,胡琪,蒋育华. 喷雾器喷头注塑模设计[J]. 塑料科技, 2008, 36(2): 86-88 |
| |
| 作者姓名： | 段武茂 胡琪 蒋育华 |
| |
| 作者单位： | 江西农业大学工学院,江西南昌,330045 |
| |
| 摘 要： | 通过喷雾器喷头塑件注塑模具的设计,阐述了该模具脱模机构的设计方法,解决了该模具动模型芯的安装难题,复位机构采用弹簧复位,保证脱模机构顺利复位。
|
| 关 键 词： | 注塑模 脱模机构 弹簧复位 侧向分型 |
| 文章编号： | 1005-3360（2008）02-0086-03 |
| 收稿时间： | 2007-11-18 |
| 修稿时间： | 2007-11-18 |
Design of Injection Mould for Spray Header |
| |
| Duan Wumao,Hu Qi,Jiang Yuhua. Design of Injection Mould for Spray Header[J]. Plastics Science and Technology, 2008, 36(2): 86-88 |
| |
| Authors: | Duan Wumao Hu Qi Jiang Yuhua |
| |
| Abstract: | Based on the design of the injection mould for spray header, the design method for the demoulding mechanism was introduced. The spring replacement mechanism was adopted for the replacement structure to solve the assembling problem of the core of the moving plate, which ensures the replacement of the demoulding mechanism. |
| |
| Keywords: | Injection mould Demoulding mechanism Spring replacement Side parting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
