| 平板类气体辅助注射成型产品的CAE模拟研究 |
| |
| 引用本文： | 毛华杰,张波,王剑阳,华林.平板类气体辅助注射成型产品的CAE模拟研究[J].塑性工程学报,2005,12(3):96-99. |
| |
| 作者姓名： | 毛华杰 张波 王剑阳 华林 |
| |
| 作者单位： | 武汉理工大学,材料科学与工程学院,武汉,430070 |
| |
| 摘 要： | 通过建立具有代表性的平板类气体辅助注射成型产品模型,借助注塑成型CAE软件Moldflow对该模型进行了一系列分析模拟。通过对模拟结果数据的综合分析和数学处理,得到了气体注射参数对气道穿透长度的影响规律、气体注射参数设置及气道穿透长度预测公式。
|
| 关 键 词： | 气体辅助注射成型 CAE 工艺参数优化 |
| 文章编号： | 1007-2012(2005)03-0096-04 |
| 修稿时间： | 2004年7月1日 |
The planar gas-assisted injection molding part's CAE simulation study |
| |
| MAO Hua-jie,ZHANG Bo,WANG Jian-yang,HUA Lin.The planar gas-assisted injection molding part''''s CAE simulation study[J].Journal of Plasticity Engineering,2005,12(3):96-99. |
| |
| Authors: | MAO Hua-jie ZHANG Bo WANG Jian-yang HUA Lin |
| |
| Abstract: | In this thesis, a series of typical planar gas-assisted injection molding parts are created. With the help of CAE software moldflow, the GAIM process of these parts are simulated and the analysis results are received. By the thorough study and mathematic treatment of the results, a set of rules between gas parameters and gas penetration length are concluded, furthermore, three formulas of gas parameters and gas penetration length are deduced. At the end, three verifying models are created to validate the formulas. |
| |
| Keywords: | gas-assisted injection molding CAE process parameters optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
