| 注塑模具的排位设计 |
| |
| 引用本文： | 付伟,魏保立. 注塑模具的排位设计[J]. 工程塑料应用, 2008, 36(4): 60-63 |
| |
| 作者姓名： | 付伟 魏保立 |
| |
| 作者单位： | 华东交通大学机电学院,南昌,330013;郑州铁路职业技术学院,郑州,450052 |
| |
| 摘 要： | 以注塑模具设计为主线,介绍了模具排位的方法和技巧。具体阐述了模具设计和模具排位时,各系统和机构的设计要点、设计方法和注意事项。用大量的实用设计参考数据说明通过合理的排位,可有效地提高设计质量,减少设计时间,降低设计成本。
|
| 关 键 词： | 注塑模具 排位 设计 |
| 修稿时间： | 2008-01-28 |
DESIGN FOR ARRAY OF INJECTION MOLD |
| |
| Fu Wei,Wei Baoli. DESIGN FOR ARRAY OF INJECTION MOLD[J]. Engineering Plastics Application, 2008, 36(4): 60-63 |
| |
| Authors: | Fu Wei Wei Baoli |
| |
| Abstract: | The array methods and techniques of injection mold are presented. The design elements, design methods and matters needing attention when designing the mold and arraying the mold are expounded. According to a great deal of practical design data, this method can effectively improve design quality and reduce design time and design costs through reasonable arraying. |
| |
| Keywords: | injection mold array design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
